chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Hub, Bearing, Knuckle, and Seal Assembly Replacement|Page 10124 > < Hub, Bearing, Knuckle, and Seal Assembly Replacement|Page 10122

S10/T10 Blazer 4WD V6-4.3L VIN W (1997)

Page 4
background image

-

Tighten drive axle nut to 140 Nm (103 ft. lbs.).

16. Tire and wheel. 

a. Lower the vehicle.
b. Apply the brake pedal.
c. Check vehicle trim height and align the front end.

 

Hub, Bearing, Knuckle, and Seal Assembly Replacement|Page 10124 > < Hub, Bearing, Knuckle, and Seal Assembly Replacement|Page 10122