Replacing Axle Bearing in S10/T10 Blazer 4WD V6-43L VIN W (1997)
Axle Bearing: Service and Repair
REMOVE OR DISCONNECT
-
Tools Required:
-
J 2619 Slide Hammer
-
J 2619-4 Adapter
-
J 22813-01 Axle Bearing Puller
1. Brake drum and wheel.
2. Axle shaft.
3. Seal using a seal removal tool behind the steel case of the seal.
-
Be careful not to damage the housing.
4. Bearing using J 2619, J 2619-4, and J 22813-01.
-
The tangs of the tool should engage the bearing outer race.
INSTALL OR CONNECT
-
Tools Required:
-
J 23765 Axle Shaft Bearing Installer
-
J 23771 Axle Shaft Seal Installer
