S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
7. Lever assembly to floor nuts.
8. Lever assembly.
INSTALL OR CONNECT
1. Lever assembly.
2. Lever assembly to floor nuts.
-
Tighten lever assembly nuts to 12 Nm (9 ft. lbs.).
3. Control cable to the lever assembly retainer clip.
4. Control cable to the shift lever.
5. Selector switch.
Adjust
-
Transfer case cable.
6. Console.
7. Shift retainer knob and retainer.
8. Negative battery cable.
