S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
![background image](/chevrolet/s10/t10_p/u_2wd/l4-2.2l_vin_4/Page-1679008.png)
Removing Rotor & Bearing Assembly Retainer Ring
E. Install the retainer ring.
F. Reassemble the Clutch Plate and Hub with the shaft key onto the shaft with Installer J 9401-B until 0.5-7.6mm (0.20-0.030") air gap is
obtained.
G. Install shaft lock nut. Torque to 14 N.m (10 lb.ft.).