S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
Tighten
-
Fuel inlet pipe retaining nut to 30 Nm (22 lb. ft.).
-
Fuel pipe support nut to 10 Nm (89 lb. in.).
7. Unplug fuel feed and return lines.
8. Fuel feed and return line fittings.
9. Upper manifold assembly.
-
Refer to Upper Manifold Assembly. See: Upper Manifold Assembly
10. Tighten fuel filler cap.
11. Negative battery cable.
INSPECT
-
Turn ignition switch to the "ON" position for two seconds, then turn to the "OFF" position for ten seconds. Again turn to the "ON" position
and check for fuel leaks.