S10/T10 P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Tailgate Latch: Service and Repair
Endgate Latch Replacement
Endgate Latch Replacement
Removal Procedure
1. Open the endgate.
2. Remove the endgate trim panel.
3. Remove the endgate latch rod from the endgate latch.
4. Remove the bolts that retain the endgate latch to the endgate.
5. Remove the endgate latch from the vehicle.
Installation Procedure
1. Install the endgate latch to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the endgate latch to the endgate.
Tighten the bolts to 10 N.m (88 lb in).
3. Install the endgate latch rod to the endgate latch.
4. Install the endgate trim panel.