S10/T10 P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
5. Install the A/C compressor to the accessory bracket.
6. Install the A/C compressor rear bracket mounting bolts.
Tighten
Tighten the A/C compressor rear bracket mounting bolts to 31 Nm (23 ft. lbs.).
7. Install the A/C compressor mounting bolts.
Tighten
Tighten the A/C compressor mounting bolts to 50 Nm (37 ft. lbs.).
8. Connect the A/C compressor electrical connection.
9. Install the power steering pump pulley. Refer to Power Steering Pulley Replacement.
10. Install the drive belt. Refer to Drive Belt Replacement in Engine.
11. Install the power steering pump hoses.
12. Install the upper fan shroud. Refer to Fan Shroud Replacement in Cooling System.
13. Fill the power steering system.
