S10/T10 P/U 2WD V6-262 4.3L VIN Z TBI (1995)
Compressor Clutch: Service and Repair
With V5 Compressor
Clutch Plate and Hub Assembly
Remove or Disconnect
Removing Shaft Nut
1. Clamp the holding fixture J 34992 in a vise and attach compressor to holding fixture with thumb screws J 34992-1.
2. Keep the clutch hub and drive plate assembly from turning by using the clutch hub holding tool J 33027-A. Remove the shaft nut using shaft nut
socket J 33022.
Clutch Plate And Hub Assembly Removal