Repair and Service for Canister Purge Solenoid in Evaporative Emissions System (With PCM)
Canister Purge Solenoid: Service and Repair
With Powertrain Control Module (PCM)
Evaporative Emission (EVAP) Control System
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connector and hoses from Evaporative Emissions System (EVAP) canister purge solenoid.
3. EVAP canister purge solenoid from mounting bracket by pulling away from bracket.
INSTALL OR CONNECT
1. Slide EVAP canister purge solenoid into bracket.
2. Electrical connector and hoses to EVAP canister purge solenoid.
3. Negative battery cable.
