chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relays and Modules - Accessories and Optional Equipment > < Diagram Information and Instructions|Page 10264
Page 1
background image

Tape Player: Service and Repair

For the best operation of the cassette tape player, do not use cassette tapes that are longer than 100 minutes in playback time (50 minutes per side).
Cassette tapes longer than 100 minutes may cause tape slippage or jamming.

There are two parts that are cleaned on a tape player: the head and the capstan. Since they can be reached through the tape door, leave the tape player in
the vehicle. This service should be performed every 100 hours of operation.

Cassette Player Care

To clean the head and capstan, use a cotton swab dipped in ordinary rubbing alcohol, or use a cleaning cassette.

Use Of Cleaning Cassette

A cleaning cassette kit may be purchased. Follow the instructions included with the kit to clean the tape player.

Do not contact the tape head with magnetized tools. If the head becomes magnetized, every cassette played in the player will be degraded.

No service is performed on the tapes and warranty of these tapes is handled by the cassette manufacturer, not by the dealer. Any test tape used by the
dealer should be stored in it's container to keep the tape clean. Store cassettes away from extreme heat or direct sunlight.

Relays and Modules - Accessories and Optional Equipment > < Diagram Information and Instructions|Page 10264