S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Front Door Interior Handle: Service and Repair
Inside Handle Bezel
Front Door Inside Handle Bezel
Remove or Disconnect
1. Screw that retains the inside door handle bezel to the door trim panel.
2. Inside door handle bezel from the door trim panel by prying at rear of the bezel with the door lock knob in locked place.
Install or Connect
1. Inside door handle bezel to the door trim panel.
A. Route the inside door handle and lock rod through the appropriate openings in the bezel.
B. Align the lock rod to the door lock knob.
C. Position the bezel and snap it into place.
2. Screw that retains the inside door handle bezel to the door trim panel.
Tighten
^
Screw to 1.9 Nm (17 lb. in.).