S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Keyless Entry Transmitter Battery: Service and Repair
Opening Trasmitter Case
REMOVE OR DISCONNECT
1. Open the transmitter case.
^
Insert a dime between the two halves of the transmitter case at the slot provided near the key ring hole and twist the dime to open the case.
2. Battery.
Transmitter Battery Replacement
INSTALL OR CONNECT
1. Battery.
^
Use one Panasonic three-volt CR3032 or equivalent battery. Install the battery with the positive (+) side down.
2. Close the transmitter case.
^
Align the two halves of the case and snap them together.
3. Resynchronize the transmitte.
4. Check the operation of the system.
