S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
Master Cylinder
REMOVE OR DISCONNECT
^ Apply the parking brake.
1. Brake pipes.
^ Cover the ends of the pipes to prevent dirt from entering the system.
2. Nuts.
3. Master cylinder.
INSTALL OR CONNECT
^ Before installation, refer to Bench Bleeding.
1. Master cylinder.
2. Nuts.
^ Tighten Nuts to 36 Nm (27 ft. lbs.).
3. Pipes.
Tighten:
^ Pipe fittings to 27 Nm (20 ft. lbs.).
^ Bleed the brakes. Refer to Hydraulic Brake System.
^ Release parking brake.
