S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Cruise Control Module: Service and Repair
Cruise Control Module
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Cruise control cable.
3. Electrical connectors as necessary.
4. Screws that retain the cruise control module to the cowl panel.
5. Cruise control module from the vehicle.
Electrostatic Discharge Label
INSTALL OR CONNECT
1. Cruise control module to the vehicle.
2. Screws that retain the cruise control module to the cowl panel.
Tighten
Screws to 4.5 N.m (40 lb in).
3. Electrical connectors as necessary.
4. Cruise control cable.
5. Negative battery cable.
6. Check system operation.