S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Water Pump: Service and Repair
REMOVAL
1. Drain the coolant from the radiator.
2. Remove the drive belt. Refer to Engine.
3. Remove the upper fan shroud. Refer to Fan Shroud Replacement.
4. Remove the cooling fan. Refer to Fan Clutch Replacement.
5. Remove the cooling fan clutch.
6. Remove the coolant pump drive pulley.
7. Loosen the radiator outlet hose clamp.
8. Remove radiator outlet hose from the coolant pump.
9. Remove the coolant pump attaching bolts.
10. Remove the coolant pump from the engine.