S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Intake Manifold: Service and Repair
Intake Manifold Removal
REMOVAL
1. Disconnect the negative battery cable.
2. Drain the cooling system. Refer to Cooling System.
3. Remove the air cleaner intake duct.
4. Remove the distributor. Refer to Starting and Charging.
5. Remove the upper radiator hose at the thermostat housing. Refer to Cooling System.
6. Remove the throttle linkage and bracket from the upper intake manifold.
7. Remove the heater hoses at the lower intake manifold.
8. Remove the transmission oil level indicator and tube (automatic transmissions only).
9. Remove the Exhaust Gas Recirculation (EGR) tube, clamp, and bolt. See: