S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Ignition Cable: Service and Repair
Service Cautions
Spark Plug Wire Routing (Left Side)
Spark Plug Wiring Routing (Right Side)
SERVICE CAUTIONS
1. Twist boots one-half turn before removing.
2. When removing the boot, do not use pliers or other tools that could tear the boot.
3. Do not force anything between the wire and the boot, or through the silicone jacket of the wiring.
4. Do not pull on the wires to remove the boot. Pull on the boot or use a tool designed for this purpose.
5. Special care should be used when installing spark plug boots to ensure the metal terminal within the boot is fully seated on the spark plug terminal
