chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel - Throttle Body & Throttle Cable Revisions|Page 6364 > < Diagram Information and Instructions|Page 6359
Page 1
background image

Throttle Body: Technical Service Bulletins
Fuel - Throttle Body & Throttle Cable Revisions

File In Section: 6E Engine Fuel & Emission

Bulletin No.: 77-65-10A

Date: June, 1998

INFORMATION

Subject:
Throttle Body and Throttle Cable Revisions

Models:
1997 Chevrolet and GMC M/L, S/T Models 
1997 Oldsmobile Bravada
with 4.3L V6 Engines (VINs W, X - RPOs L35, LF6)

This bulletin is being revised to correct a throttle body part number. Please discard Corporate Service Bulletin Number 77-65-10 (Section 6E - Engine
Fuel & Emission).

A 1997 mid-model year production change involving the Throttle Body and Accelerator Cable has occurred on the above identified vehicles. When
replacing the Throttle Body or the Accelerator Cable, the correct components must be used (see text).

Important:

The use of an incorrect Accelerator Cable will result in:

^

A raised idle speed (Accelerator Cable too short) or

^

Inability to obtain W.O.T. (Accelerator Cable too long).

The throttle cable cam on the Throttle Body has been re-designed. This change causes the throttle blade to open sooner for a given throttle position,

This production change occurred during 1997 vehicle production in mid-October, 1996. The following VIN breakpoints have been established:

The use of the new Throttle Body requires a different Accelerator Cable.

When ordering service parts, determine which Throttle Body the engine has. The correct Accelerator Cable must be used.

Fuel - Throttle Body & Throttle Cable Revisions|Page 6364 > < Diagram Information and Instructions|Page 6359