S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Starter Motor Replacement: Removal Procedure
15. Remove the starter from the vehicle.
16. Remove the shims, if equipped.
INSTALLATION PROCEDURE
Starter Motor Replacement: Removal Procedure
1. Install the starter motor to the engine.
Starter Motor Replacement: Removal Procedure
2. Install the inboard starter mounting bolt. Do not tighten the bolt.
3. Install the starter shims and the outboard starter mounting bolt.
Tighten
Tighten the starter mounting bolts to 43 N.m (32 lb ft).
4. Install the lower flywheel cover.
5. Connect the transmission line bracket to the flywheel housing.
6. Connect the brace rod to the flywheel housing.
7. Slide the transmission crossmember back into place.
8. Attach the transmission mount to the transmission.
9. Connect the transmission crossmember to the frame with the six bolts.