S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Starter Motor Replacement: Removal Procedure
5. Remove the starter from the vehicle.
6. Remove the starter shims, if equipped.
INSTALLATION PROCEDURE
Starter Motor Replacement: Removal Procedure
1. Install the starter to the vehicle.
Starter Motor Replacement: Removal Procedure
2. Install the inboard starter mounting bolt. Do not tighten.
3. Install the starter shims to the vehicle, if equipped.
4. Install the outboard starter mounting bolt.
Tighten
Tighten the starter mounting bolts to 43 N.m (32 lb ft).
