S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Window Regulator: Service and Repair
Trim Panel
Front Door Trim Panel
Tool Required:
J 38778 Trim Panel Remover
Remove or Disconnect
1. Inside door handle bezel.
2. Window regulator handle.
3. Trim panel armrest screw cover from the armrest.
^
Carefully pry off the cover with a flat blade tool.
4. Screws that retain the trim panel to the door..
5. Door trim panel from the door.
^
Use tool J 38778 to release the door trim panel retainers.
Install or Connect
1. Door trim panel to the door.
2. Screws that retain the door trim panel to the door.
Tighten
^
Screws to 1.9 N.m ((17 lb. in.).
3. Trim panel armrest screw cover to the armrest.
^
Position the cover and snap it into place.
4. Window regulator handle.
5. Inside door handle bezel.