S10/T10 P/U 2WD V6-4.3L VIN W (1997)
Wiper Control Module: Service and Repair
Description
Remove or Disconnect
1. Negative battery cable.
2. Wipe motor electrical connector
3. Screws.
4. Cover.
5. Circuit board and terminal assembly by lifting up on terminal.
Install or Connect
1. Circuit board and terminal assembly.
2. Cover.
3. Screws.
Tighten
^
Circuit board and terminal assembly screws to 2.5 N.m (23 lbs. in.).
4. Wiper motor electrical connector.
5. Negative battery cable.