S10/T10 P/U 2WD V6-4.3L VIN X (1996)
between the deflector and door, as well as waterproof sealing tape.
Remove or Disconnect
1. Trim panel.
2. Water deflector.
A. Pull the waterproof sealing tape from the deflector.
B. Break the bond between the sealer and the door with a flat-blade tool.
Install or Connect
1. Water deflector to the door.
^
Use strip caulking as a sealant between the deflector and the door if needed.
2. Waterproof tape.
3. Trim panel to the door.
Window Regulator
Front Door Window Regulator
Tool Required
J 34940 Rivet Gun
Remove or Disconnect
1. Trim panel.
2. Water deflectors from the door
^
Raise the window to the closed position and secure glass to the door frame using cloth-backed tape.
3. Rivets securing the regulator to the door inner panel (5).
4. Regulator lift arm roller from the window sash (3).
5. Regulator from the door.
6. Power window motor (if applicable).
Install or Connect
1. Power window motor (if applicable).
2. Regulator to the door.
3. Regulator lift arm roller to the window sash (3).
4. Rivets securing the regulator to the door inner panel (5) J 34940.
5. Water deflector.
6. Trim panel
Window Regulator Handle Replacement