S10/T10 P/U 4WD V6-262 4.3L VIN Z (1992)
Vacuum Reservoir HVAC: Service and Repair
Engine Vacuum Line Routing
NOTE: The vacuum tank is installed on the left front (driver's side) wheel fender in the engine compartment.
REMOVE OR DISCONNECT
1. Vacuum hose (56).
2. Screws.
3. Tank (55).
INSTALL OR CONNECT
1. Tank (55).
2. Screws.
-
Tighten screws to 3 Nm (27 in. lb.).
3. Vacuum hose (56).
