S10/T10 P/U 4WD V6-4.3L VIN W (1997)
Axle Shaft Assembly: Service and Repair
Front Axle
Drive Axle Removal
FRONT DRIVE AXLE
REMOVE OR DISCONNECT
1. Unlock the steering column so that the steering linkage is free to move.
2. Raise the vehicle and support it with suitable safety stands.
3. Tires and wheel.
4. Insert a drift through the brake caliper into one of the brake rotor vanes to prevent the drive axle from turning.
5. Axle nut, and washer.
6. Remove the drift from the brake rotor