S10/T10 P/U 4WD V6-4.3L VIN X (1996)
Exhaust Manifold: Service and Repair
1. Disconnect battery ground cable.
2. Raise and support vehicle.
3. Disconnect exhaust pipe from manifold.
4. Lower vehicle, then remove spark plug wires from spark plugs.
5. Remove power steering and alternator rear bracket from left manifold.
6. Remove air cleaner with heat stove pipe and cold air intake pipe.
7. Remove exhaust manifold bolts and washers, then the manifold.
8. Reverse procedure to install.
