Silverado 1500 2WD V6-4.3L (2007)
Notice: Refer to Fastener Notice.
4. Install the rocker arm cover bolts.
Tighten the bolts to 12 N.m (106 lb in).
5. Position the engine wiring harness.
6. Connect the engine wiring harness clips.
7. Connect the following electrical connectors:
*
The ignition coil (1)
*
The ignition coil drive (2)
*
The generator (3)
8. Position the heater hoses.
9. Install the heater outlet to the hose clip.
