Silverado 1500 2WD V6-4.3L (2007)
Engine Mount: Service and Repair
Engine Mount Replacement - Right
Engine Mount Replacement - Right Side
Removal Procedure
Notice: Refer to Engine Mounting Notice.
1. From under the hood, remove the engine mount to engine mount bracket bolts. (left side shown, right side similar).
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
3. Remove the oil pan skid plate bolts and plate.
Notice: Refer to Engine Lifting Notice.
4. Using an adjustable jack on the square tab (left side shown) at the rear of the engine block, raise the engine. In order to access the square tab,
remove the starter. (left side shown, right side similar). Refer to Starter Motor Replacement (4.3L) Starter Motor Replacement (4.8L, 5.3L, 6.0L,
and 6.2L) Starter Motor Replacement (6.6L).
