Silverado 1500 2WD V6-4.3L (2007)
6. Disconnect the EVAP vent solenoid pipe quick connect fitting (3) from the EVAP canister.
7. Remove the EVAP canister vent solenoid pipe clip (1) from the frame crossmember.
8. Disengage the retainer (1) securing the EVAP canister vent solenoid.
9. Slide the EVAP canister vent solenoid off the bracket towards the passenger side of the vehicle.
10. Remove the EVAP canister vent solenoid from the vehicle.
Installation Procedure
