Silverado 1500 2WD V8-5.3L VIN B HO (2006)
Tailgate Shock / Support: Service and Repair
Linkage Replacement - Endgate
Linkage Replacement - Endgate
Removal Procedure
1. Lower the endgate.
2. Loosen the endgate handle bolts. Refer to Handle Replacement - Endgate.
3. Raise the endgate.
4. Remove the handle bezel by prying gently on the upper retainer tabs.
5. Lower and support the endgate.
6. Remove the endgate latch assembly.
7. Disengage the linkage rod from the latch assembly.
8. Remove the linkage rod (1) from the endgate handle assembly.
Installation Procedure