Silverado 1500 2WD V8-5.3L VIN B HO (2006)
7. Important: o Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap
exists, or the plastic cap is damaged, obtain a new cap.
Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
^
If equipped with a 8.1L engine perform the following:
8. Install the oil cooler hoses to the clip.
9. Connect the engine oil cooler quick connect fittings.
