chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Discharge Hose Replacement|Page 2966 > < A/T - 4L60-E, 4L65-E Fluid Leak From Bell Housing Area|Page 2963
Page 1
background image

Hose/Line HVAC: Service and Repair
Discharge Hose Replacement

DISCHARGE HOSE REPLACEMENT

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.

2. Remove the discharge hose mounting bolt (2) from the A/C compressor.
3. Remove the discharge hose (1) from the A/C compressor.
4. Remove the upper radiator baffle.

5. Remove the discharge hose nut from the condenser.
6. Remove the discharge hose from the condenser.
7. Disconnect the electrical connector from the A/C recirculation switch.
8. Remove the discharge hose from the vehicle.
9. Discard all of the used sealing washers. Cap the system openings.

INSTALLATION PROCEDURE

Discharge Hose Replacement|Page 2966 > < A/T - 4L60-E, 4L65-E Fluid Leak From Bell Housing Area|Page 2963