Silverado 1500 2WD V8-5.3L VIN B HO (2006)
8. Align the hole in the pinion shaft with the bolt hole in the differential case.
9. Install the new pinion shaft locking bolt.
^
Tighten the bolt to 34 Nm (25 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the rear cover and the gasket.
11. Install the tire and wheel assembly.
12. Fill the rear axle, using the proper fluid.
13. Lower the vehicle.
Rear Axle Shaft Replacement (8.6 Inch Axle W/Drum Brakes)
Rear Axle Shaft Replacement (8.6 Inch Axle w/Drum Brakes)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly.
3. Remove the rear cover and gasket.
4. Remove the pinion shaft locking bolt.
