Silverado 1500 2WD V8-6.0L (2010)
1. Position the wheel stud in the rear axle shaft.
2. Using washers and a wheel nut, tighten the wheel nut until the wheel stud is firmly seated in the rear axle shaft.
3. Remove the wheel nut and the washers.
4. Install the rear axle hub assembly, if removed. Refer to Rear Axle Hub, Bearing, Cup, and/or Seal Replacement (See: Transmission and
Drivetrain/Drive Axles, Bearings and Joints/Axle Bearing/Service and Repair/Rear Axle Hub, Bearing, Cup, and/or Seal Replacement).
5. Install the brake rotor. Refer to Rear Brake Rotor Replacement (JD9) (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JD9))Rear Brake Rotor Replacement (JH6) (See: Brakes and Traction
Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH6))Rear Brake Rotor Replacement (JH7) (
See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH7)).
6. Install the rear brake drum. Refer to Brake Drum Replacement (See: Brakes and Traction Control/Drum Brake System/Brake Drum/Service and
Repair/Removal and Replacement).
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
8. Remove the supports and lower the vehicle.