Silverado 1500 2WD V8-6.0L Hybrid (2009)
5. Install 1 oil pan bolt into a oil pan bolt hole and up through the gasket.
6. Position and install the oil pan and the rest of the oil pan bolts.
7. Tighten the oil pan bolts.
*
M6 Bolts-Tighten the bolt to 12 Nm 106 lb in).
*
M8 Bolts-Tighten the bolt to 25 Nm (18 lb ft).
8. Install the 2 lower transmission bolts.
Tighten the bolts to 50 Nm (37 lb ft).
9. Install the air conditioning (A/C) compressor bracket bolts (1).
Tighten the bolt to 50 Nm (37 lb ft).
10. Connect the engine harness electrical connector (1) to the oil level sensor.
