Chevrolet Workshop Service and Repair Manuals > Silverado 1500 2WD V8-6.0L Hybrid (2009) > Powertrain Management | Computers and Control Systems | Variable Valve Timing Actuator | Component Information | Service and Repair | Camshaft Position Actuator Magnet Replacement

Page 2

1. Install a NEW CMP actuator magnet gasket (753) onto the CMP actuator magnet.
2. Install the CMP actuator magnet (752) to the front cover.

Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .

3. Install the CMP actuator magnet bolts (751).

Tighten the bolts to 12 Nm (106 lb in).

4. Connect the engine harness electrical connector to the CMP actuator magnet.
5. Install the water pump. Refer to Water Pump Replacement .

Chevrolet Workshop Service and Repair Manuals