Silverado 1500 2WD V8-6.0L Hybrid (2009)
10. Remove the cable grommet from the floor panel.
11. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
12. Remove the clips on the cable from the floor panel reinforcement.
13. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
14. Remove the range selector lever cable heat shield bolts (1).
15. Remove the range selector lever cable heat shield (2).
16. Ensure the transmission manual shaft is positioned in mechanical park.
