Silverado 1500 2WD V8-6.0L Hybrid (2009)
8. Place an alignment mark between the pinion and the pinion yoke.
Note
DO NOT reuse the pinion nut, replace with NEW.
9. Using the J 8614-01 - holder and remover , remove and discard the pinion the pinion nut.
Note
Remove the pinion yoke by turning the J 8614-3 (3) clockwise.
10. Using the J 8614-2 (2), J 8614-3 (3) and the J 8614-01 - remover (1), remove the pinion yoke.