Silverado 1500 4WD V8-6.0L (2010)
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Filters/Air Cleaner Housing/Air Cleaner Fresh
Air Duct/Hose/Service and Repair).
9. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
10. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement (Without AFM) (See:
Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair)Intake Manifold Replacement (With AFM) (See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair).
