Silverado 1500 4WD V8-6.0L Hybrid (2009)
Brake Fluid Level Indicator Switch Replacement (JD9, JF3, JF7)
Brake Master Cylinder Adapter Replacement
Removal Procedure
1. Place the transmission in the PARK or NEUTRAL position.
2. Apply the park brake.
Note
The ignition must be in the OFF position, without pausing at ACCESSORY, and without applying the brake pedal to ensure the brake modulator and
high pressure accumulator (HPA) pressure relief occurs. This process will take approximately 1 to 3 minutes.
3. Turn the ignition to OFF, without pausing at ACCESSORY, and without applying the brake pedal.