Silverado 1500 4WD V8-6.0L Hybrid (2009)
Tools Required
J 37043 Park Brake Cable Release Tool
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable
Adjuster Disabling) .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
4. Disconnect the left park brake cable (1) from the intermediate cable equalizer bar (2).
5. Release the left park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit (3) rearward.
6. Remove the park brake cable from the cable guides.
7. Remove the brake shoes. Refer to Brake Shoe Replacement (See: Drum Brake System/Brake Shoe/Service and Repair) .
8. Using the J 37043 (1), remove the park brake cable from the backing plate.