Silverado 1500 4WD V8-6.0L Hybrid (2009)
1. If the intake manifold was replaced perform the following steps, otherwise proceed to step 21.
Note
Evenly push in the RED collar in order to install the nipple.
2. Install the brake booster vacuum hose nipple to the NEW intake manifold.
3. Install NEW fuel injector lower O-ring seals onto the injectors.
4. Lubricate the NEW O-ring seals with clean engine oil.
Note
Push down firmly on both sides of the rail until all the injectors have been seated into their bores.
5. Install the fuel rail.
