Silverado 1500 4WD V8-6.0L Hybrid (2009)
7. Temporarily install the PIM cover (2) with 4 finger-tightened fasteners (1).
8. Rotate the drive motor generator control module assembly onto the PIM cover.
9. Remove the APM to PIM mounting fasteners (1).
10. Remove the APM (2) and discard the coolant seal (3).
11. Remove the drive motor generator power inverter coolant pipe bolts (4, 7).
12. Remove the drive motor generator power inverter coolant pipes (5, 8).
13. Remove and discard coolant seals (6, 9).
Installation Procedure