Silverado 1500 4WD V8-6.0L Hybrid (2009)
15. If equipped with 6 ft 5 in. bed, perform the following steps:
16. Disconnect the fuel tank EVAP line quick connect fitting (1) from the fuel fill pipe recirculation line. Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
17. Loosen the fuel tank fill pipe clamp (2) at the fuel tank.
18. Remove the fuel tank fill pipe.
19. Cap the opening on the fuel tank in order to prevent possible system contamination.
Installation Procedure
1. If equipped with 6 ft 5 in. bed, perform the following steps:
2. Remove the cap from the opening on the fuel tank.
3. Position the fuel tank fill pipe.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
4. Tighten the fuel tank fill pipe clamp (2) at the fuel tank.
Tighten the clamp to 2.5 Nm (22 lb in).
