Silverado 1500 4WD V8-6.0L Hybrid (2009)
1. Remove the cap from the opening on the fuel tank.
2. Position the fuel tank fill pipe.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
3. Tighten the fuel tank fill pipe clamp (1) at the fuel tank to 2.5 Nm (22 lb in) .
4. Connect the fuel fill pipe recirculation line quick connect fitting (2) to the EVAP rear hose. Refer to Plastic Collar Quick Connect Fitting Service
(See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
5. Install the rear axle vent hose to the clip on the fuel fill pipe bracket.
6. Close the axle vent hose clip.