Silverado 1500 4WD V8-6.0L Hybrid (2009)
5. Install the starter solenoid cable terminal (2) to the fuse stud.
6. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm (11 lb ft).
7. Install the fuse cover.
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (With Single Battery) (See: Battery/Battery
Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (With Auxiliary Battery) (See: Battery/Battery Cable/Service
and Repair)Battery Negative Cable Disconnection and Connection (With Dual Batteries) (See: Battery/Battery Cable/Service and Repair) .