Silverado 1500 4WD V8-6.0L Hybrid (2009)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler Replacement (With Hydroboost)
Removal Procedure
1. Remove the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) (See: Body and Frame/Grille/Service and Repair)Radiator Grille
Replacement (GMC) (See: Body and Frame/Grille/Service and Repair) .
2. Remove as much power steering fluid from the power steering fluid reservoir as possible.
3. Place drain pans under the vehicle as needed.
Caution: Refer to Power Steering Hose Disconnected Caution () .
4. Disconnect the power steering fluid cooler hose (3) from the steering gear (2).
5. Disconnect the power steering fluid cooler hose (4) from the power steering pump (1).
6. Remove the power steering fluid cooler bolts (2).
7. Remove the power steering fluid cooler (1) from the vehicle.
Installation Procedure