Silverado 1500 4WD V8-6.0L Hybrid (2009)
7. Remove the auxiliary fluid pump (2).
Caution: The auxiliary fluid pump gasket is not re-usable. Use a NEW gasket when replacing or damage may occur.
8. Remove the auxiliary fluid pump gasket (3).
Installation Procedure
Caution: The auxiliary fluid pump gasket is not re-usable. Use a NEW gasket when replacing or damage may occur.
1. Install the auxiliary fluid pump gasket (3).
Caution: Do not damage the case sealing surface when removing or installing the pump and motor assembly.
2. Install the auxiliary fluid pump (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
3. Install the auxiliary fluid pump bolts (1).
Tighten the bolts to 9-13 Nm (80-115 lb in).
4. Install the auxiliary fluid pump wire harness clip nut (3).
Tighten the nuts to 9 Nm (80 lb in).
5. Lower the vehicle.
6. Install the auxiliary fluid pump wire harness (6) to the harness retainers (7).
