Silverado 1500 4WD V8-6.0L Hybrid (2009)
4. Install the selective shim (1) on the shoulder on the differential pinion gear (2).
Note
Press the bearing on until the cone seats on the pinion shim.
5. Using the J 22828 - installer or the J 36614 - installer , install the inner pinion bearing.
6. Install a new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Use the proper fluid. Refer to Fluid and Lubricant Recommendations .
8. Install the outer pinion bearing into the axle housing.
9. Install the differential pinion gear into the axle housing.
Note
DO NOT re-use the old pinion nut, replace with NEW only.
