Silverado 1500 4WD V8-6.0L Hybrid (2009)
Replace Transfer Case Rear Output Shaft
Note
Do Not replace the output shaft unless the cleaning and lubrication procedure is ineffective.
1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement in SI.
2. Disassemble the transfer case. Refer to Transfer Case Disassemble in SI.
3. Replace the transfer case rear output shaft. Refer to the Parts Information below.
4. Assemble the transfer case.
5. Reinstall the transfer case assembly.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer